Produkty dla mini automaty (3)

Reparatur, Austausch & Ersatz für ABB Robotersysteme und ABB IRC5 & S4 Pendants Seit Anfang 2018 bieten wir Ihnen generalüberholende Reparaturen sowie Austauschteile und Ersatzteile für Roboter-Bedienhandgeräte der Produktreihen IRC5, IRC5P, S4, S4+, S4C+, S4P sowie S4P+ des Herstellers ABB an. Ab sofort bieten wir Ihnen unsere umfassenden Serviceleistungen auch für alle ABB-Baugruppen (Antriebe, IPCs, Netzteile, Motoren, Kabel uvm.) aus dem Bereich der Robotersteuerungselektronik folgender Baureihen an: • S2 / S3 • S4 / S4C / S4C+ • S4P / S4P+ • IRC5 Neben der Verwendung von vom Hersteller oder Gesetzesgeber zugelassenen Bauteile testen wir die generalüberholten ABB Bedienhandgeräte und ABB Robotersysteme mit originalen IRB ABB-Robotern unter Bedingungen, die Ihrem realen Arbeitsumfeld entsprechen. Damit können wir Ihnen auch hier 24 Monate Gewährleistung* auf die komplette ABB Baugruppe geben.

The Mini Shaft Loader allows you to load short shafts. The loading is done automatically. Do you have remnants of long bar feeder and would you like to process them? Or do you want to load very short shafts automatically? The MSL is the ideal complement for the Multi-3000 to load short shafts. It has a multi-profile loading prism. So you can load round and hexagonal material and all this without changing channels. Special profiles are possible on request. Impact-free recharging thanks to the exclusive recharging cycle. The recharging cycle is based on the patented recharging mechanism of the Multi 3000. After fast and precise bar removal, the material is gently placed on the loading prism. The Mini Shaft Loader is connected to the bar feeder. This takes over the power supply and control of the loading system. The material is fed via the slide of the loading magazine. Round profile:Ø 5-65 mm Hexagonal material:Ø 5-56 mm Square material:Option Wave length:40-250 mm* Bar feed:servo motor of the existing bar feeder * max. standard length 140mm. :Other lengths available as an option on request.

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID. Time intervall:0.5 - 60 s  Function:3/2-way NC  Pressure range:1.5 - 8 bar Type of pneumatic connection:1/8 NPT  Product type:Timer  Mounting:Subplate  Medium:Compressed air, non lubricated  Ambient temperature:-10 ... +60 °C